Eurotrac W11 Eurotrac 810 / W11 - C Wheel Loader

Make, model: EUROTRAC 810 / W11 - C Type of vehicle: Articulated mini loader Serial number: 11A2102261 Year of manufacture: 2021 Mileage: 986.4 mth Technical specifications of the valuation item: Engine: KUBOTA D1105-EF02, Emission standard: STAGE IV, Engine type: three-cylinder, vertical, liquid-cooled, four-stroke diesel Displacement: 1.123 l (1123 cm³) Cylinder bore x stroke: 78.0 mm x 78.4 mm Maximum power: 18.2 kW at 3000 rpm Maximum torque: 71.5 Nm at 2200 rpm Controls and hydraulics: Steering: Articulated steering. Power steering pump: Hydraulic Steering cylinder: Double-acting hydraulic cylinder, mounted at the joint Maximum steering angle: approx. ±45° Bondioli & Pavesi hydraulic pump, PUMP 4PV28-28 D2 3 Working pressure 180 bar Boom: Type: Front loader, parallelogram, lifted by hydraulic cylinders Working load 400 kg Bucket tilt angles (rear/front) 49° / 43° Total weight 1,680 kg Max. lifting capacity 1,100 kg Capacities: Fuel / hydraulic tank: 25 l / 40 l Electrical system: Operating voltage 12 V DC Battery / alternator 12 V, 60 Ah / 12 V 40 A Dimensions: Height 2,200 mm Length 2,960 mm Width 1,100–1,150 mm (depending on tires) Ground clearance 230 mm Wheelbase 1370 mm Equipment: - Full cab with heating - Front and rear work lights on the cab roof - Warning light - Hydraulic quick couplers for attachments - Third hydraulic circuit for attachments - Operator''s seat with mechanical suspension Technical condition: - Visual condition: satisfactory; numerous corrosion spots on the boom components and covers. Paintwork is loose in places, with visible chips, scratches, and cracks. Machine dirty. - Wear: corresponds to the declared service life based on the year of construction; visible wear at lubrication points, and no excessive play was observed during inspection. Engine and drive – Kubota D1105-EF02 (1.1 l) STAGE IV emission standard, running, operating correctly within the tested range; visible signs of corrosion on the exhaust manifold and exhaust system, no visible leaks. Electrical system in contact with intensely heated exhaust system components – signs of thermal deformation of wire insulation. - On-board computer readings – no abnormalities. - Chassis – complete, corrosion on axles and suspension components, soil contamination, tires in good condition, visible different tire brands on the axles (front axle – Super Trencher 26X12.00-12 NHS wear 70%, rear axle – Power / Lug 26X12.00-12 NHS – wear 70%). - Working system – hydraulic cylinders are complete, with visible traces of minor oil leaks in places, and numerous corrosion spots on the working arm. Paintwork and corrosion spots are present. - Body and cab – Body and cab components are damaged and require repair/replacement: - door glass – cracked and chipped, - exterior covers – visible cracks and scratches, - cab interior dirty from use; dust and deposits on the floor, sills, and panels. - floor and steps – paint worn down to the metal, with localized corrosion spots on the edges and entry threshold. - joystick with two buttons – head and shaft worn; rubber bellows worn/cracked in places. - pedals – worn and dirty surfaces; corrosion deposits on metal parts. - Right console - four air vents; housing scratched and dirty; fan/heating knobs present. - Seat upholstery in satisfactory condition - crack in backrest, - Cabin structure - cracks in paintwork at joints and welds, corrosion spots, - Right rear fender - dented, corrosion spots, - Hydraulic reservoirs - chips, corrosion spots, traces of makeshift paint repairs, - Rear counterweight - chips, corrosion spots, traces of makeshift paint repairs, - Engine compartment cover - lock damaged, - Work lamp brackets - corrosion at mounts, - Wheel discs - chips, corrosion spots. Deficiencies: - Exterior mirrors, - Front driving lights (turn signals, headlights). Other: Two keys were presented for inspection – one each for the ignition switch and the locks. Type number: Eurotrac 810 / W11 - C Wheel Loa